Spacer hook
Accessories - Precast Concrete
Spacer hooks are the fast, precise and safe way to position reinforcing mesh in your molds.
- Description
Plasti-Tom concrete pipe spacer hooks are suitable for 6 mm and 8 mm wire mesh. A wire mesh spacer placed every 12 to 18 inches around the top and bottom of the reinforcing cage ensures the required spacing between the reinforcement and the formwork surface to achieve the desired concrete cover, while preventing the cage from moving during fabrication.
- Table of available models
List of available products:
2000 Series - 2-inch (51 mm) mesh
Product Coverage Bar diameter Quantity per bag 2125-W9 1.25" (32 mm) 0.338 in (8.6 mm) 800 2125-W14 1.25" (32 mm) 0.422 in (10.72 mm) 800 2125-W18 1.25" (32 mm) 0.479 in (12.17 mm) 800 2140-W9 1.5" (40 mm) 0.338 in (8.6 mm) 800 2140-W14 1.5" (40 mm) 0.422 in (10.72 mm) 800 2140-W18 1.5" (40 mm) 0.479 in (12.17 mm) 800 2150-W9 2" (50 mm) 0.338 in (8.6 mm) 800 2150-W14 2" (50 mm) 0.422 in (10.72 mm) 800 2150-W18 2" (50 mm) 0.479 in (12.17 mm) 800 3000 Series - 3-inch (76 mm) mesh
Product Coverage Bar diameter Quantity per bag 3075 0.75 in (18 mm) 6-8 mm 600 3100 1" (25 mm) 6-8 mm 600 3125 1.25" (32 mm) 6-8 mm 600 3150 1.5" (40 mm) 6-8 mm 600 - Further information
Quantity 600 bag, 800 bag
Spacing 51 mm (2"), 76 mm (3")
Cover(s) 19 mm (0.75"), 25 mm (1"), 32 mm (1.25"), 38 mm (1.5"), 50 mm (2")
Mesh 8.6 mm (0.388”)
- Opinions
Previous
Lattice spacer
